How to set solar controller

The solar charge controller is the device that must be used in the off-grid system, and the controller

plays a very important role in the solar off-grid system. So how to set the solar controller?

Please check the following answer:

Solar controller mode:

1, pure light control mode: When there is no sunlight, the light intensity dropped to the starting point, the controller delay 10 minutes to confirm the start signal, the load is set

according to set parameters, the load began to work; when there is sunlight , The light rose to

the starting point, the controller delay 10 minutes to confirm the closure of the signal output,

the load stopped working.

2, light control + time control mode: start the process and pure light control the same, when

the load to set the time to automatically shut down, set the time 1 to 14 hours.

3, manual mode: In this mode, the user can press the button to control the load on and off,

regardless of whether the day or night. This mode is used for occasions with special load or

during debugging.

4, Debug mode: It is used for system debugging. When there is a light signal, it will turn off

the load and no light signal will turn on the load to check the correctness of system

installation during installation and debugging.

5, normally open mode: power load has been to maintain the output state, this mode is suitable

for the load needs 24 hours.

If you want to know about more details .Thanks very much!

Contact: sale3@olys-digital.com, OLYS solar charge controller manufactruer

www.olyssolar.com

Shenzhen OLYS company limitede focus on solar chareg controller in China for 12 years, our cooperations company had 300 all over in the world .

Related product

solar charge controller DIY

Related article

How to adjust solar street light controller