12V / 24V universal solar charge controller

When we buy pwm solar controller, we must first determine how much your own battery voltage, multiple battery strings, parallel will produce different voltages, such as: 12V, 24V, 48V and so on. Then according to the battery voltage matching the appropriate type of controller. For example, your battery voltage is 12V, it is necessary to choose the appropriate 12V controller, if it is 24V paired 24V controller. Shenzhen Olys technology has a 12V / 24V universal solar charge controller, so when matching is more convenient, the following on this controller I do introduce.

一: SMC Series Solar Controller Features

1, This product can be automatically adapted to 12V and 24V systems.

2, the product uses intelligent SCM design, all workflow are software control, enabling high-precision, high reliability.

3, with strong, balanced charge, floating charge three-stage charging method, at the same time with high-precision temperature compensation.

4, with over charge, over discharge, electronic short circuit, overload protection, anti-reverse protection and other unique automatic control, the above protection does not damage any part.

5,five LED status indicator, the user can clearly understand the various states of charge and discharge and load.

二: the use of solar controller

1, the product can automatically adapt to 12V and 24V systems, the voltage at the start of more than 20V, 24V system will be identified. If the battery voltage is not within the normal operating range (about 12V-15.5V or 24V-31V) at startup, the LED will show an error condition. Please refer to the fault description to find out the reason.

2, the controller factory set to lead-acid batteries.

3, the battery must be at least once a month is fully charged, you can effectively protect the battery life

4, if the battery is fully charged, you must ensure that the energy consumption of the load is lower than the charged energy.

5, please children away from the battery and controller to prevent accidents.

三: Solar Charge Controller Installation Notes:

1, It is suggested that the user load the controller and battery in the same place so that the controller can monitor the temperature of the battery at any time. Adjust the charge and discharge parameters.

2, please ensure that the cooling holes around the controller is not blocked by other items, affecting heat dissipation.

3, the wiring sequence: 1. Connect the battery - 2. Then connect the solar panels - 3. Finally, the load.

4, the system ground: All of the positive internal controller is connected together, if you need the system ground, allowing only positive

The above information provided by the Shenzhen Olys Technology and Technology.

Shenzhen Olys Technology 12 years focused on the development and manufacture of solar controller, master the core of solar energy controller, cutting-edge technology, service more than 300 new energy companies.

If you have in terests for solar charge and have any concern , please send mail to Anna:sale2@olys-digital.com, Whatsapp:+8615367961529

Related product

12V/24V DC controller

Related article

Solar charge controller basic functions